Philips Hue Flicker-free: Smart Bulb Flickering Guide

  • Post author:
  • Reading time:7 mins read
  • Post category:Misc
  • Post last modified:
Spread the love

Philips Hue flicker-free lights are designed to reduce eye strain and headaches.

What Types of Flashing Occur with Smart Bulbs?

With smart LEDs, there are two types of flashing – invisible flashing and visible flashing.

  1. Visible flashing
    Visible flashing is the one noticeable with your eyes, happening with rapid changes in light output from a source. The human eye can perceive frequencies below 100Hz. Exposure to frequencies from 3Hz to 70Hz can lead to epileptic seizures (source).
  2. Invisible flashing
    Invisible flashing occurs when flickering happens, but our eyes cannot perceive it. It remains invisible if it occurs at a frequency above 100Hz. Possible symptoms include impaired thought, eyestrain, migraine, headaches, and dizziness.

What causes Philips Hue to flicker and blink? 6 causes + bonus

Light tubes, filament candles, floor lamps and Spotify: Everything Philips  Hue just announced - CNET

1. Surges in Power

Be wary of power surges since they may potentially ruin your light switches and fuses. Dimmers are vulnerable to lightning strikes because they allow electricity to enter the residence.

2. A Philips Hue Dimmer Switch Installation

The Philips Hue dimmer switch is superior than standard wall switches since it is wireless and works with your Philips Hue. Wiring is not an issue when using the Philips Hue dimmer switch. It’s a remote control that looks like a light switch and may be mounted on the wall.

Philips Hue White Filament E27 A60 LED bulb

3. Modifying the flashing bulb replacement

If a different bulb works without any issues, we know the flickering one is broken. If you are not covered by the manufacturer’s warranty, the best course of action is to replace the bulb with the replacement bulb or to purchase a new Philip Hues bulb. If the dimmer switch, the wiring, and other obvious causes are ruled out, then the bulb must be at fault. If the incessant blinking is driving you crazy, you should replace it.

4. A Case of Overloaded Wiring

Your Philips hue bulb flashing due to an overloaded circuit, which is related to wiring issues. Overloading a circuit is possible if you use your Philips Hues with other high-wattage products. Bulbs may not get enough power on overloaded circuits.

The circuit is probably overloaded if the hue light blinking is caused by a large number of electrical equipment, such as washing machines and air conditioners. The flashing Philips Hue might be a sign of an overloaded circuit or a malfunctioning circuit breaker, both of which could lead to more serious problems such as a house fire if not addressed immediately.

5. Alternative Explanations

There are a number of potential causes of your Philips Hue blinking, including power outages and interference with the radio signal. This is beyond your ability to solve. Call your utility company if you suspect that your neighbours are using excessive amounts of electricity and putting a strain on the area transformers.

LED bulbs, TVs, and radios are all negatively impacted by signal interferences. Since Philip Hues interact with the Hue bridge electronically, a nearby radio tower or mast might impact them even if you don’t have any radio equipment.

6. Poorly secured Philips Hue light bulbs

It may seem absurd, but sometimes the bulbs aren’t properly linked up to the bulb sockets, which results in the lights flickering on and off. Turn off the power and check whether the bulb is making good contact with the socket, even if you’re certain that your dimmer switch is alright since it’s relatively recent.

Electrical currents in a bulb might be disturbed if the bulb does not establish good contact with the bulb socket. Philips Hue LED lights will flicker and flash if the electricity supply to your Philips Hues is suddenly cut off. Make sure you always correctly connect your Philips Hue or any other kind of bulb to prevent headaches and pain.

There are several potential triggers for hue Philips Hue flashing on and off.

  • Incompatibility with Dimmer Switch: It’s possible that the smart bulb you’re using is incompatible with the dimmer switch you’re using. Or a dimmable incandescent bulb or an early-generation LED.
  • Dimmer Adjustment Impact: Someone may have turned down the dimmer switch that regulates the amount of power going to the smart Philips Hue lights, making it more difficult for the lamps to respond to orders.
  • High-Power Appliance Interference: On occasion, you may have a high-power appliance, such as a microwave, hair drier, or fan, plugged into that circuit. For example, (older GE/Jasco networked dimmer switches were very sensitive to changes in draw to the circuit as a whole.)
  • Radio Signal Disruption: Radio signals to a networked switch or smart bulb might be disrupted.

How to Fix Philips Hue Light Frickering? >>

Rate this post